We use cookies to make your experience better.
To comply with the new e-Privacy directive, you agree to the privacy policy and our use of cookies.
Cables Direct USB2-GIGETHB network card USB
SKU
USB2-GIGETHB
Category: Network Cards
| SKU | USB2-GIGETHB |
|---|---|
| EAN | 5055781242182 |
| Manufacturer | Cables Direct |
| Availability | No |
The Gigabit USB 2.0 Ethernet adapter converts a USB port into a 10/100/1000 Base-T Ethernet port. It enables low cost and affordable Gigabit Ethernet network connection to any PC, laptop or embedded system by using your existing USB ports.
- Integrates on-chip USB 2.0 PHY and controller compliant to USB Spec 2.0, and 1.1
- Supports USB Super/High/Full Speed modes with Bus-power Self-power device auto-detect capability
- Supports IEEE 802.3, 802.3u and 802.3ab
- Supports parallel detection and automatic polarity correction
- Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading
- Supports TCP Large Send Offload V1
- Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control
- Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding PHY loop-back diagnostic capability
- Supports Wake-on-LAN Function
- Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin
- Supports Windows 10, Windows 8, Windows 7, Apple 10.6 and Apple 10.8
- Integrates on-chip USB 2.0 PHY and controller compliant to USB Spec 2.0, and 1.1
- Supports USB Super/High/Full Speed modes with Bus-power Self-power device auto-detect capability
- Supports IEEE 802.3, 802.3u and 802.3ab
- Supports parallel detection and automatic polarity correction
- Supports IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU loading
- Supports TCP Large Send Offload V1
- Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control
- Supports IEEE 802.1P Layer 2 Priority Encoding and Decoding PHY loop-back diagnostic capability
- Supports Wake-on-LAN Function
- Supports suspend mode and remote wakeup via link-change, Magic Packet, Microsoft Wakeup Frame and external wakeup pin
- Supports Windows 10, Windows 8, Windows 7, Apple 10.6 and Apple 10.8
| Ports & interfaces | |
|---|---|
| Internal | No |
| USB version | 2.0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Interface | USB |
| Host interface | RJ-45 |
| Connectivity technology | Wired |
| Bandwidth | |
| Full duplex | Yes |
| Technical details | |
| Product colour | White |
| Wake-on-LAN ready | Yes |
| Network | |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Wake-on-LAN ready | Yes |
| Full duplex | Yes |
| Design | |
|---|---|
| Product colour | White |
| Internal | No |
| Software | |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8 |
| Mac operating systems supported | Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
| System requirements | |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8 |
| Mac operating systems supported | Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
| Performance | |
| Wake-on-LAN ready | Yes |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8 |
| Mac operating systems supported | Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |