Cablenet POE Tester IEEE802.3at/af

SKU
POETESTER
Login for pricing
Out Of Stock - Contact for availability
IEEE802.3at/af POE Tester
PLANET POE-TESTER is an easy-to-use PoE diagnostic adapter for network installers, company MIS and even home users to quickly identify the existence of Power over Ethernet on applications network. It is designed to detect if the IEEE 802.3af/at PoE voltage runs over the UTP cable and identify the type of PSE (Power Source Equipment) for troubleshooting.

Simply connect the POE-TESTER to the PSE or the RJ-45 outlet and the LED will light up when it detects the PoE voltage via the UTP cable and identifies the PSE to be mid-span, end-span, or even the latest 4-pair 60-watt ultra PoE in a second.

The POE-TESTER provides two LEDs for quick and easy PSE mode identification. A Power over Ethernet system comprises a PSE (Power Sourcing Equipment) and a PD (Powered Device). The PSE is a device that will provide power in a PoE setup. There are two types of PSE, Mode A and Mode B. The PSE may either be a Mode A, end span PoE switch or a Mode B, mid-span PoE injector.

Although PDs that implement only Mode A with end-span or Mode B with mid-span are disallowed by the IEEE 802.3af/at standard, there are still some of the PDs that are designed to work with only one of the modes. Thus, it will cause the PoE PSE and PD not to be compatible with each other in the applications. For example, an end span designed PoE switch cannot power on the remote mid-span only wireless access point. But most of the time, the installers would not exactly know what the remote PSE devices are. PLANET POE-TESTER checks your UTP cable for power and identifies its source, mid-span or end-span. Make sure at the end of UTP cable there is existence of PoE, and then the next step is to check if the PD is compatible with the PSE, or it is a malfunctioned PD.

Quickly tests RJ-45 outlet for Power over Ethernet existence
Two LEDs indicate the types of PSE (power source equipment)
End-span PoE switch
Mid-span PoE injector / injector hub
4-pair, 60-watt ultra PoE injector
Compliant with IEEE 802.3at/af Po E standard
Compact size, Plug and Play design

SEE TECHNICAL DATA SHEET FOR FULL DETAILS
SKU POETESTER
EAN 5056750331999
Specification
Technical details
Product typePoE tester
Supported connectorsRJ-45
Test typePoE testing
CertificationCE, FCC
Easy to useYes
Built-in displayNo
Networking standardsIEEE 802.3af, IEEE 802.3at
LED indicatorsYes
Product colourWhite
Cable typeUTP
Weight & dimensions
Width23 mm
Depth70.1 mm
Height22 mm
Weight20 g
Operational conditions
Operating temperature (T-T)-10 - 60 °C
Operating relative humidity (H-H)5 - 95%
Manufacturer Cablenet
In Stock No